SLEDGE

Be the first to review this product

SLEDGE

Be the first to review this product

This product is fitment specific

To see if this product is compatible Select a vehicle

Qty

Starting at $305.00

You have not specified your vehicle; therefore, we cannot guarantee this product will fit. To guarantee fitment, please select your vehicle.

Locate Your Nearest Installer Covered By Wheel Pros Limited Warranty

To the fullest extent recognized by the laws of the state where the wheel was purchased, Fuel Off-Road issues this limited warranty to define the rights of the purchaser, and limit Fuel Off-Road liability, with regard to warranty claims.

Fuel Off-Road warrants that our wheels will be free from structural failure under normal and intended use for as long as the original retail purchaser owns the product. Customers are specifically directed to the Fuel Off-Road Consumer Information and WTC Aftermarket Wheel Installation Guidelines, supplied with the wheel. Failure to comply with these instructions shall void this warranty.

See full Warranty details.

Fitment Guide Get in touch with our dedicated support staff

Specifications Chart

17"

18"

20"

22"

26"

Part#	Model	Finish	Size	Bolt Pattern	Backspace	Offset	Bore	Weight	Load	Lip Size	Cap	MSRP USD
D59517902645	D595 SLEDGE	GLOSS BLACK MILLED	17X9	5X114.3/5X127	4.53	-12mm	78.10	36.00 lbs	2500	1.89	1001-79GB	$331.00
D59517909849	D595 SLEDGE	GLOSS BLACK MILLED	17X9	6X135/6X139.7	5.08	02mm	106.10	36.00 lbs	2500	1.89	1001-79GB	$331.00
D59517909845	D595 SLEDGE	GLOSS BLACK MILLED	17X9	6X135/6X139.7	4.53	-12mm	106.10	36.00 lbs	2500	1.89	1001-79GB	$331.00
D59617902645	D596 SLEDGE	MATTE BLACK GLOSS BLACK LIP	17X9	5X114.3/5X127	4.53	-12mm	78.10	36.00 lbs	2500	1.89	1001-79B	$305.00
D59617902650	D596 SLEDGE	MATTE BLACK GLOSS BLACK LIP	17X9	5X114.3/5X127	5.04	01mm	78.10	36.00 lbs	2500	1.89	1001-79B	$305.00
D59617907045	D596 SLEDGE	MATTE BLACK GLOSS BLACK LIP	17X9	5X139.7/5X150	4.53	-12mm	110.10	36.00 lbs	2500	1.89	1001-79B	$305.00
D59617909849	D596 SLEDGE	MATTE BLACK GLOSS BLACK LIP	17X9	6X135/6X139.7	5.08	02mm	106.10	36.00 lbs	2500	1.89	1001-79B	$305.00
D59617909845	D596 SLEDGE	MATTE BLACK GLOSS BLACK LIP	17X9	6X135/6X139.7	4.53	-12mm	106.10	36.00 lbs	2500	1.89	1001-79B	$305.00

Part#	Model	Finish	Size	Bolt Pattern	Backspace	Offset	Bore	Weight	Load	Lip Size	Cap	MSRP USD
D59518902650	D595 SLEDGE	GLOSS BLACK MILLED	18X9	5X114.3/5X127	5.04	01mm	78.10	40.00 lbs	2500	1.91	1001-79GB	$376.00
D59518902645	D595 SLEDGE	GLOSS BLACK MILLED	18X9	5X114.3/5X127	4.53	-12mm	78.10	40.00 lbs	2500	1.91	1001-79GB	$376.00
D59518907050	D595 SLEDGE	GLOSS BLACK MILLED	18X9	5X139.7/5X150	5.04	01mm	110.10	40.00 lbs	2500	1.91	1001-79GB	$376.00
D59518907057	D595 SLEDGE	GLOSS BLACK MILLED	18X9	5X139.7/5X150	5.79	20mm	110.10	39.00 lbs	2500	1.91	1001-79GB	$376.00
D59518909850	D595 SLEDGE	GLOSS BLACK MILLED	18X9	6X135/6X139.7	5.04	01mm	106.10	40.00 lbs	2500	1.91	1001-79GB	$376.00
D59518909845	D595 SLEDGE	GLOSS BLACK MILLED	18X9	6X135/6X139.7	4.53	-12mm	106.10	40.00 lbs	2500	1.91	1001-79GB	$376.00
D59518909856	D595 SLEDGE	GLOSS BLACK MILLED	18X9	6X135/6X139.7	5.75	19mm	106.10	39.00 lbs	2500	1.91	1001-79GB	$376.00
D59518908257	D595 SLEDGE	GLOSS BLACK MILLED	18X9	8X165.1	5.79	20mm	125.10	39.00 lbs	3700	1.91	1001-63GB	$376.00
D59518908250	D595 SLEDGE	GLOSS BLACK MILLED	18X9	8X165.1	5.04	01mm	125.10	40.00 lbs	3700	1.91	1001-63GB	$376.00
D59518901750	D595 SLEDGE	GLOSS BLACK MILLED	18X9	8X170	5.04	01mm	125.10	40.00 lbs	3700	1.91	1001-79GB	$376.00
D59518901857	D595 SLEDGE	GLOSS BLACK MILLED	18X9	8X180	5.79	20mm	124.20	39.00 lbs	3700	1.91	1002#53GB	$376.00
D59518901850	D595 SLEDGE	GLOSS BLACK MILLED	18X9	8X180	5.04	01mm	124.20	40.00 lbs	3700	1.91	1002#53GB	$376.00
D5961880C159	D596 SLEDGE	MATTE BLACK GLOSS BLACK LIP	18X8	5X110/5X127	5.88	35mm	72.56	37.00 lbs	2100	1.39	1002-79MBR	$316.00
D59618805259	D596 SLEDGE	MATTE BLACK GLOSS BLACK LIP	18X8	5X114.3/5X120	5.88	35mm	72.56	35.00 lbs	2100	1.39	1002-79MBR	$316.00
D5961880D259	D596 SLEDGE	MATTE BLACK GLOSS BLACK LIP	18X8	6X114.3/6X120	5.88	35mm	72.56	35.40 lbs	2100	1.39	1002-79MBR	$316.00
D59618902645	D596 SLEDGE	MATTE BLACK GLOSS BLACK LIP	18X9	5X114.3/5X127	4.53	-12mm	78.10	40.00 lbs	2500	1.91	1001-79B	$376.00
D59618907057	D596 SLEDGE	MATTE BLACK GLOSS BLACK LIP	18X9	5X139.7/5X150	5.79	20mm	110.10	39.00 lbs	2500	1.91	1001-79B	$376.00
D59618909845	D596 SLEDGE	MATTE BLACK GLOSS BLACK LIP	18X9	6X135/6X139.7	4.53	-12mm	106.10	40.00 lbs	2500	1.91	1001-79B	$376.00
D59618909850	D596 SLEDGE	MATTE BLACK GLOSS BLACK LIP	18X9	6X135/6X139.7	5.04	01mm	106.10	40.00 lbs	2500	1.91	1001-79B	$376.00
D59618909856	D596 SLEDGE	MATTE BLACK GLOSS BLACK LIP	18X9	6X135/6X139.7	5.75	19mm	106.10	39.00 lbs	2500	1.91	1001-79B	$376.00
D59618901757	D596 SLEDGE	MATTE BLACK GLOSS BLACK LIP	18X9	8X170	5.79	20mm	125.10	39.00 lbs	3700	1.91	1001-79B	$376.00
D59618901857	D596 SLEDGE	MATTE BLACK GLOSS BLACK LIP	18X9	8X180	5.79	20mm	124.20	39.00 lbs	3700	1.91	1002#53MB	$376.00

Part#	Model	Finish	Size	Bolt Pattern	Backspace	Offset	Bore	Weight	Load	Lip Size	Cap	MSRP USD
D63120907050	D631 SLEDGE	CHROME PLATED	20X9	5X139.7/5X150	5.04	01mm	110.10	40.00 lbs	2500	1.92	1001-79	$498.00
D63120909857	D631 SLEDGE	CHROME PLATED	20X9	6X135/6X139.7	5.79	20mm	106.10	40.00 lbs	2500	1.92	1001-79	$498.00
D63120909850	D631 SLEDGE	CHROME PLATED	20X9	6X135/6X139.7	5.04	01mm	106.10	40.00 lbs	2500	1.92	1001-79	$498.00
D63120908250	D631 SLEDGE	CHROME PLATED	20X9	8X165.1	5.04	1mm	125.10	40.00 lbs	3700	1.84	1001-63	$498.00
D63120901750	D631 SLEDGE	CHROME PLATED	20X9	8X170	5.04	1mm	125.10	40.00 lbs	3700	1.84	1001-79	$498.00
D63120901857	D631 SLEDGE	CHROME PLATED	20X9	8X180	5.79	20mm	124.20	40.00 lbs	3700	1.84	1002#53	$498.00
D63120901850	D631 SLEDGE	CHROME PLATED	20X9	8X180	5.04	1mm	124.20	40.00 lbs	3700	1.84	1002#53	$498.00
D63120007047	D631 SLEDGE	CHROME PLATED	20X10	5X139.7/5X150	4.79	-18mm	110.10	40.00 lbs	2500	3.80	1001-79	$530.00
D63120009847	D631 SLEDGE	CHROME PLATED	20X10	6X135/6X139.7	4.79	-18mm	106.10	40.00 lbs	2500	3.80	1001-79	$530.00
D63120008247	D631 SLEDGE	CHROME PLATED	20X10	8X165.1	4.79	-18mm	125.10	40.00 lbs	3700	3.80	1001-63	$530.00
D63120001747	D631 SLEDGE	CHROME PLATED	20X10	8X170	4.79	-18mm	125.10	40.00 lbs	3700	3.80	1001-79	$530.00
D63120001847	D631 SLEDGE	CHROME PLATED	20X10	8X180	4.79	-18mm	124.20	40.00 lbs	3700	3.80	1002#53	$530.00
D59520902650US	D595 SLEDGE	GLOSS BLACK MILLED	20X9	5X114.3/5X127	5.04	1mm	78.10	40.00 lbs	2500	1.92	1001-79GB	$426.00
D59520907050US	D595 SLEDGE	GLOSS BLACK MILLED	20X9	5X139.7/5X150	5.04	1mm	110.10	40.00 lbs	2500	1.92	1001-79GB	$426.00
D59520907057	D595 SLEDGE	GLOSS BLACK MILLED	20X9	5X139.7/5X150	5.79	20mm	110.10	40.00 lbs	2500	1.92	1001-79GB	$426.00
D59520906957	D595 SLEDGE	GLOSS BLACK MILLED	20X9	6X120/6X139.7	5.75	19mm	78.10	37.00 lbs	2500	1.84	1001-79GB	$426.00
D59520909856	D595 SLEDGE	GLOSS BLACK MILLED	20X9	6X135/6X139.7	5.75	19mm	106.10	37.00 lbs	2500	1.84	1001-79GB	$426.00
D59520909850US	D595 SLEDGE	GLOSS BLACK MILLED	20X9	6X135/6X139.7	5.04	1mm	106.10	40.00 lbs	2500	1.92	1001-79GB	$426.00
D59520909857	D595 SLEDGE	GLOSS BLACK MILLED	20X9	6X135/6X139.7	5.79	20mm	106.10	40.00 lbs	2500	1.92	1001-79GB	$426.00
D59520908257	D595 SLEDGE	GLOSS BLACK MILLED	20X9	8X165.1	5.79	20mm	125.10	40.00 lbs	3700	1.84	1001-63GB	$426.00
D59520908250	D595 SLEDGE	GLOSS BLACK MILLED	20X9	8X165.1	5.04	1mm	125.10	40.00 lbs	3700	1.84	1001-63GB	$426.00
D59520901750	D595 SLEDGE	GLOSS BLACK MILLED	20X9	8X170	5.04	1mm	125.10	40.00 lbs	3700	1.84	1001-79GB	$426.00
D59520901857	D595 SLEDGE	GLOSS BLACK MILLED	20X9	8X180	5.79	20mm	124.20	40.00 lbs	3700	1.84	1002#53GB	$426.00
D59520002647	D595 SLEDGE	GLOSS BLACK MILLED	20X10	5X114.3/5X127	4.79	-18mm	78.10	40.00 lbs	2500	3.80	1001-79GB	$457.00
D59520007047	D595 SLEDGE	GLOSS BLACK MILLED	20X10	5X139.7/5X150	4.79	-18mm	110.10	40.00 lbs	2500	3.80	1001-79GB	$457.00
D59520009846US	D595 SLEDGE	GLOSS BLACK MILLED	20X10	6X135/6X139.7	4.75	-19mm	106.10	36.00 lbs	2500	3.79	1001-79GB	$457.00
D59520008247	D595 SLEDGE	GLOSS BLACK MILLED	20X10	8X165.1	4.79	-18mm	125.10	40.00 lbs	3700	3.80	1001-63GB	$457.00
D59520001747US	D595 SLEDGE	GLOSS BLACK MILLED	20X10	8X170	4.79	-18mm	125.10	40.00 lbs	3700	3.80	1001-79GB	$457.00
D59520001847	D595 SLEDGE	GLOSS BLACK MILLED	20X10	8X180	4.79	-18mm	124.20	40.00 lbs	3700	3.80	1002#53GB	$457.00
D59520207047	D595 SLEDGE	GLOSS BLACK MILLED	20X12	5X139.7/5X150	4.77	-44mm	110.10	44.00 lbs	2500	5.81	1001-79GB	$530.00
D59620905263	D596 SLEDGE	MATTE BLACK GLOSS BLACK LIP	20X9	5X114.3/5X120	6.38	35mm	72.56	39.00 lbs	2500	1.87	1001-79B	$426.00
D59620907050	D596 SLEDGE	MATTE BLACK GLOSS BLACK LIP	20X9	5X139.7/5X150	5.04	01mm	110.10	40.00 lbs	2500	1.92	1001-79B	$426.00
D59620907057	D596 SLEDGE	MATTE BLACK GLOSS BLACK LIP	20X9	5X139.7/5X150	5.79	20mm	110.10	40.00 lbs	2500	1.92	1001-79B	$426.00
D59620906957	D596 SLEDGE	MATTE BLACK GLOSS BLACK LIP	20X9	6X120/6X139.7	5.75	19mm	78.10	37.00 lbs	2500	1.84	1001-79B	$426.00
D59620909856	D596 SLEDGE	MATTE BLACK GLOSS BLACK LIP	20X9	6X135/6X139.7	5.75	19mm	106.10	37.00 lbs	2500	1.84	1001-79B	$426.00
D59620909850	D596 SLEDGE	MATTE BLACK GLOSS BLACK LIP	20X9	6X135/6X139.7	5.04	01mm	106.10	40.00 lbs	2500	1.92	1001-79B	$426.00
D59620908250	D596 SLEDGE	MATTE BLACK GLOSS BLACK LIP	20X9	8X165.1	5.04	1mm	125.10	40.00 lbs	3700	1.84	1001-63-B	$426.00
D59620901750	D596 SLEDGE	MATTE BLACK GLOSS BLACK LIP	20X9	8X170	5.04	1mm	125.10	40.00 lbs	3700	1.84	1001-79B	$426.00
D59620901857	D596 SLEDGE	MATTE BLACK GLOSS BLACK LIP	20X9	8X180	5.79	20mm	124.20	40.00 lbs	3700	1.84	1002#53MB	$426.00
D59620007047	D596 SLEDGE	MATTE BLACK GLOSS BLACK LIP	20X10	5X139.7/5X150	4.79	-18mm	110.10	40.00 lbs	2500	3.80	1001-79B	$457.00
D59620009846	D596 SLEDGE	MATTE BLACK GLOSS BLACK LIP	20X10	6X135/6X139.7	4.75	-19mm	106.10	39.44 lbs	2500	3.79	1001-79B	$457.00
D59620008247	D596 SLEDGE	MATTE BLACK GLOSS BLACK LIP	20X10	8X165.1	4.79	-18mm	125.10	40.00 lbs	3700	3.80	1001-63-B	$457.00
D59620001747	D596 SLEDGE	MATTE BLACK GLOSS BLACK LIP	20X10	8X170	4.79	-18mm	125.10	40.00 lbs	3700	3.80	1001-79B	$457.00
D59620001847	D596 SLEDGE	MATTE BLACK GLOSS BLACK LIP	20X10	8X180	4.79	-18mm	124.20	40.00 lbs	3700	3.80	1002#53MB	$457.00
D59620202647	D596 SLEDGE	MATTE BLACK GLOSS BLACK LIP	20X12	5X114.3/5X127	4.77	-44mm	78.10	44.00 lbs	2500	5.81	1001-79B	$530.00
D59620209846	D596 SLEDGE	MATTE BLACK GLOSS BLACK LIP	20X12	6X135/6X139.7	4.73	-45mm	106.10	44.00 lbs	2500	5.81	1001-79B	$530.00

Part#	Model	Finish	Size	Bolt Pattern	Backspace	Offset	Bore	Weight	Load	Lip Size	Cap	MSRP USD
D63122007057	D631 SLEDGE	CHROME PLATED	22X10	5X139.7/5X150	5.89	10mm	110.10	50.00 lbs	2500	3.48	1001-79	$736.00
D63122009856	D631 SLEDGE	CHROME PLATED	22X10	6X135/6X139.7	5.89	10mm	106.10	45.00 lbs	2500	3.27	1001-79	$736.00
D63122001857	D631 SLEDGE	CHROME PLATED	22X10	8X180	5.89	10mm	124.20	50.00 lbs	3700	3.48	1002#53	$736.00
D59522959859	D595 SLEDGE	GLOSS BLACK MILLED	22X9.5	6X135/6X139.7	6.00	19mm	106.10	50.00 lbs	2500	2.09	1001-79GB	$518.00
D59522951860	D595 SLEDGE	GLOSS BLACK MILLED	22X9.5	8X180	6.04	20mm	124.20	50.00 lbs	3700	2.09	1002#53GB	$518.00
D59522009847	D595 SLEDGE	GLOSS BLACK MILLED	22X10	6X135/6X139.7	4.79	-18mm	106.10	49.00 lbs	2500	3.79	1001-79GB	$539.00
D59522009856	D595 SLEDGE	GLOSS BLACK MILLED	22X10	6X135/6X139.7	5.89	10mm	106.10	45.00 lbs	2500	3.27	1001-79GB	$539.00
D59522008247	D595 SLEDGE	GLOSS BLACK MILLED	22X10	8X165.1	4.79	-18mm	125.10	49.00 lbs	3700	3.79	1001-63GB	$539.00
D59522001747	D595 SLEDGE	GLOSS BLACK MILLED	22X10	8X170	4.79	-18mm	125.10	49.00 lbs	3700	3.79	1001-79GB	$539.00
D59522001847	D595 SLEDGE	GLOSS BLACK MILLED	22X10	8X180	4.79	-18mm	124.20	49.00 lbs	3700	3.79	1002#53GB	$539.00
D59522001857	D595 SLEDGE	GLOSS BLACK MILLED	22X10	8X180	5.89	10mm	124.20	50.00 lbs	3700	3.48	1002#53GB	$539.00
D59522209846	D595 SLEDGE	GLOSS BLACK MILLED	22X12	6X135/6X139.7	4.73	-45mm	106.10	52.00 lbs	2500	5.83	1001-79GB	$583.00
D59522208247	D595 SLEDGE	GLOSS BLACK MILLED	22X12	8X165.1	4.77	-44mm	125.10	52.00 lbs	3700	5.83	1001-63GB	$583.00
D59522201747	D595 SLEDGE	GLOSS BLACK MILLED	22X12	8X170	4.77	-44mm	125.10	52.00 lbs	3700	5.83	1001-79GB	$583.00
D59522201847	D595 SLEDGE	GLOSS BLACK MILLED	22X12	8X180	4.77	-44mm	124.20	52.00 lbs	3700	5.83	1002#53GB	$583.00
D59622959859	D596 SLEDGE	MATTE BLACK GLOSS BLACK LIP	22X9.5	6X135/6X139.7	6.00	19mm	106.10	50.00 lbs	2500	2.09	1001-79B	$518.00
D59622007047	D596 SLEDGE	MATTE BLACK GLOSS BLACK LIP	22X10	5X139.7/5X150	4.79	-18mm	110.10	49.00 lbs	2500	3.79	1001-79B	$539.00
D59622009847	D596 SLEDGE	MATTE BLACK GLOSS BLACK LIP	22X10	6X135/6X139.7	4.79	-18mm	106.10	49.00 lbs	2500	3.79	1001-79B	$539.00
D59622009856	D596 SLEDGE	MATTE BLACK GLOSS BLACK LIP	22X10	6X135/6X139.7	5.89	10mm	106.10	45.00 lbs	2500	3.27	1001-79B	$539.00
D59622207047	D596 SLEDGE	MATTE BLACK GLOSS BLACK LIP	22X12	5X139.7/5X150	4.77	-44mm	110.10	52.00 lbs	2500	5.83	1001-79B	$583.00
D59622209846	D596 SLEDGE	MATTE BLACK GLOSS BLACK LIP	22X12	6X135/6X139.7	4.73	-45mm	106.10	52.00 lbs	2500	5.83	1001-79B	$583.00
D59622201747	D596 SLEDGE	MATTE BLACK GLOSS BLACK LIP	22X12	8X170	4.77	-44mm	125.10	52.00 lbs	3700	5.83	1001-79B	$583.00

Part#	Model	Finish	Size	Bolt Pattern	Backspace	Offset	Bore	Weight	Load	Lip Size	Cap	MSRP USD
D59526405745	D595 SLEDGE	GLOSS BLACK MILLED	26X14	5X127/5X139.7	4.55	-75mm	87.10	71.00 lbs	2500	8.09	1001-79GB	$1,214.00

Write Your Own Review

You're reviewing: SLEDGE

Your Rating

1 star

2 stars

3 stars

4 stars

5 stars

Nickname

Summary

Review

SLEDGE

SLEDGE

Specifications Chart

Write Your Own Review

You May Also Like

Fuel Social